Table Hook 3D Models: STL Hooks for Bags and Desks

«Table Hook 3D Models: STL Hooks for Bags and Desks»

The models differ mainly in how they grip the table. Some are plain hooks with a fixed slot that slides over the edge, others use a screw clamp or a parametric opening that you adjust to a measured tabletop thickness. There are also foldable print-in-place versions that pack flat, plus lighter hooks meant for camping tables and clips that hold a tablecloth down.

When choosing a model, check the tabletop thickness range the author lists and compare it with your own table, since a loose fit lets the hook slide. Look at how the load is carried: a hook for a heavy bag puts stress on the top of the opening, so layer orientation and wall count matter more than on a headphone hook. Read the material and settings the author notes, and look at photos of real prints to judge the finish and the clamp thread.

To widen the results, try synonyms such as desk hook, table hanger, edge clamp, bag holder or under-desk hook, and add the thickness you need, for example 20 mm or 30 mm. Related searches like headphone holder, cable clip, cup holder or tablet stand often return models with the same clamping principle. If nothing matches your table, a parametric or modular design lets you change the opening instead of searching again.