3D Printed Sprinklers: STL Models for Garden Watering

This collection gathers STL files for garden watering: rotating and spinning heads, rocket-shaped sprayers, jet nozzles, vortex designs and pop-up units. It is useful when you want to replace a broken sprinkler or build a spray pattern that matches your bed or lawn. Each entry is a 3D printing project, so the result depends on the file, the material and the settings you choose. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

A Polyzon collection

How this collection is put together

Polyzon assembles this collection from search results on the connected platforms. Repeats and models without a preview are removed, weak matches go to the end, and the rest keeps the search order. Models belong to their authors — check the terms on each model's page.

Selection rules: the Polyzon editorial team · Text updated 2026-10-13

The results database is still being populated. Open the full search to get up-to-date models right now.

Find 3D printed sprinklers: STL models for garden watering

About the category

«3D Printed Sprinklers: STL Models for Garden Watering»

The designs differ mainly in how they move water. Rotating and spinning sprinklers use arms or a rotor driven by the water flow, while vortex models shape the jet inside a fixed body and have no moving parts. Rocket-shaped sprayers and jet hand nozzles are usually held or mounted at the end of a hose, and pop-up heads sit lower in the ground until the pressure lifts them.

Before printing, open the author's model page and read the details: thread size and connector type, overall dimensions and scale, number of parts and how they assemble, and whether supports are needed. The page also states the material and print settings the author used, plus photos of real prints, which show how the surfaces and joints come out. Wall thickness and layer height matter here, because thin shells and coarse layers affect how the water leaves the nozzle.

To widen the search, try synonyms such as garden sprinkler, lawn sprinkler, water sprayer, irrigation head or hose nozzle, and combine them with terms like rotating, vortex, pop-up or adjustable. Related topics include hose adapters, thread converters, drip irrigation parts and other garden tools, which often appear alongside sprinkler files. Filtering by category and by the print time mentioned in the title helps narrow a long list.

A few practical points apply to most of these files. Parts that carry water are usually printed with more perimeters so the walls stay tight, and threaded connections may need a small tolerance test before the full model. If a design has several pieces, check the assembly order and whether any glue or screws are listed. Outdoor use means the printed part will sit in sun and weather, so the filament the author names is worth comparing with what you have on the spool.

FAQ

Frequently asked questions

What thread size do 3D printed sprinklers use?

It varies by design. Authors usually state the thread standard or the diameter in the model description, so check that line before printing, especially if the part must join an existing hose or tap.

Do these sprinkler models need supports?

Some do and some are split into parts to avoid them. The author's page normally says whether supports are required and where they go, so read that section before slicing.

Which filament do authors list for outdoor sprinklers?

Model pages often mention PETG, ASA or ABS for parts that stay outside, along with the temperatures and speeds used. Treat those values as the author's starting point and check them against your own printer.

How many parts does a printed sprinkler have?

Simple nozzles are often a single piece, while rotating and pop-up designs may have several parts that clip or screw together. The part count and assembly steps are listed on the model page.