Garden

3D Printing Garden Sprinklers with Gardena Ends

This collection gathers STL files for garden watering hardware: sprinklers with Gardena-style ends, micro-sprayers, rotating heads and small irrigation parts. The models differ in how they connect to a hose and in how they spread water. It helps if you already know which fitting your tap or hose line uses before you start a 3D printing job. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

A Polyzon collection · 40 models from 3 platforms

How this collection is put together

Polyzon assembles this collection from search results on the connected platforms. Repeats and models without a preview are removed, weak matches go to the end, and the rest keeps the search order. Models belong to their authors — check the terms on each model's page.

Selection rules: the Polyzon editorial team · Text updated 2026-10-14

View the collection Show all: 4531 models →
Collection

Start here

All models in this collection

Show all: 4531 models
About the category

«3D Printing Garden Sprinklers with Gardena Ends»

The most common group is sprinklers built around a Gardena-style quick-connect end, either printed directly into the body or as a separate coupler. Alongside them sit micro-sprinklers and modular irrigation sets, where several small heads share one line, and rotating or spinning designs that spread water over a wider circle. Fan-blade and hand-nozzle variants sit closer to a jet than to a spray, while pop-up collars and hose mounts are supporting parts rather than watering heads.

When choosing a file, look at the connection diameter and thread the author describes, since a hose end and a tap end are not the same size. Check how many parts the model has and whether they are meant to be glued, screwed or snapped together, and read the listed material and layer settings. Photos of real prints are the quickest way to judge wall thickness in the nozzle area and whether the moving parts of a rotating head actually turn.

If the results feel narrow, widen the wording: try garden irrigation, watering system, micro-drip, spray nozzle or hose connector instead of sprinkler alone. Adding the connection type, the thread size or the mounting position narrows it again. Related topics such as drip line fittings, tap adapters and hose repair parts often appear in the same search and can complete a setup.

FAQ

Frequently asked questions

What does a Gardena end mean on a printed sprinkler?
It usually describes the shape of the hose or tap connection the model is drawn around, so a standard quick-connect coupler fits it. The exact dimensions are set by the author, so read the model page before printing.
Which material works for a garden sprinkler?
Authors often list PETG, ASA or another weather-resistant filament, since the part stays outdoors. Check the recommended material and wall count on the model page and compare it with what your printer handles.
Do these models need supports?
It depends on the shape: flat printed bodies often need none, while round heads, threads and overhanging nozzles may need them. The author's page usually states this and shows the orientation used.
Can I scale a sprinkler model to fit my hose?
Scaling changes the connection size together with everything else, so threads and couplers may no longer match. It is safer to look for a version drawn for your connection size than to resize an existing file.
Related
Garden

STL-модели для сада и полива Gardena

25669 models
Garden

Адаптеры для Gardena: STL-файлы для 3D-печати

12173 models
Garden

Горшки для цветов в виде сердца: 3D-модели

12441 models
Garden

3D-модели держателей для косилок Viking и похожих

2525 models
Garden

3D-модели Kia Seed для дома и хобби

63711 models
Garden

Башня для растений: 3D-модели и STL файлы для печати

3075 models

All 3D model categories

The full catalog of topics — from home & household to CNC, searchable across the connected sources.

Open the category catalog