Garden

3D Models of Wind Vanes and Anemometers for 3D Printing

This collection gathers 3D models of wind vanes, from plain direction arrows to anemometer assemblies and decorative figure vanes. Most files are made for a 3D printer and shared as STL, so they can be scaled or split to fit a build volume. It is a useful starting point for a weather station project or for a moving part in a garden. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

A Polyzon collection · 47 models from 4 platforms

How this collection is put together

Polyzon assembles this collection from search results on the connected platforms. Repeats and models without a preview are removed, weak matches go to the end, and the rest keeps the search order. Models belong to their authors — check the terms on each model's page.

Selection rules: the Polyzon editorial team · Text updated 2026-10-14

View the collection Show all: 2322 models →
Collection

Start here

All models in this collection

Show all: 2322 models
About the category

«3D Models of Wind Vanes and Anemometers for 3D Printing»

The models fall into a few groups. Decorative vanes carry a figure or silhouette on the arrow, while functional vanes keep the outline plain and add a counterweight so the pointer stays level. Anemometer parts and weather station components are usually split into several pieces that meet on a shaft. Wind turbines and spiral spinners sit closer to kinetic sculpture than to measurement.

Before printing, read the author's page for the bearing or axle the design expects, the number of parts, and whether supports are needed. Balance matters more than size on a vane: a heavy tail or an off-centre figure keeps the arrow from turning in light air. Check the material and settings the author lists, and look at photos of real prints to see how the pivot and the mounting base came out.

If the results are thin, try other names for the same object: weather vane, wind direction indicator, anemometer, wind rose, wind spinner. Related searches such as weather station, wind turbine or garden twirler often surface parts that belong to the same project. Adding a word like parametric, balanced or bearing narrows the list to designs that can be adjusted.

FAQ

Frequently asked questions

What is the difference between a wind vane and an anemometer?
A wind vane shows direction, while an anemometer measures speed. Many weather station designs put both on one mast.
Do wind vanes need bearings?
Not always. Some designs use a printed pivot or a simple pin, others call for a bearing so the arrow turns in light wind. The author's page usually names the part.
How do I keep a printed vane balanced?
Print the arrow and tail as one piece where the design allows, and check the centre of mass before mounting. A small counterweight or a heavier tail section helps.
Can a wind vane be scaled down?
Yes, but scaling changes wall thickness and the fit of the pivot. If you resize, check the axle diameter and the clearance the design expects.
Related
Fandom

STL-файлы Wind Ranger для 3D-печати

14587 models
Garden

3D-модели флюгера ведьмы для печати на принтере

11303 models
Garden

Модели качелей: STL файлы для 3D печати сада

14562 models
Garden

Светильники для сада: 3D-модели и STL файлы для печати

168264 models
Garden

3D-модели насадок для полива из бочки

66657 models
Garden

STL-модели держателя для садового шланга для 3D-принтера

12252 models

All 3D model categories

The full catalog of topics — from home & household to CNC, searchable across the connected sources.

Open the category catalog