Funny Cat Figurine

All my photos are REAL and show an actual 3D-printed figure photographed by me.

[ Suggested Print Setup ]

Nozzle: 0.4mm

Layer Height: 0.15mm

Infill: 5%

Wall loops: 6

Supports: Tree (auto)

Printed with: BambuLab PLA Matte Charcoal

Printed with fuzzy skin effect.

Fuzzy Skin: Contour

Fuzzy Skin Point Distance: 0.15

Fuzzy Skin thickness: 0.15

If you're interested in the commercial use of my models, or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Thank you!

As always!

The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.