Articulated Cute Octopus

Tips for printing:

Filament: PLA

Supports: No!

Layer height: 0.2mm

Wall loops: 3

Infill: 15%

Seam position: back

Wall generator: -

Detect thin walls: -

Brim: No!

BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!

⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Do not scale the Octopus any smaller otherwise the connections will no longer work!

If you apply too much force to the legs they may break because the connections are small!

Please be careful when removing the octopus from the print bed!

Colors and filament I used (4 Color Version)

PLA / Blue

PLA / LightBlue

PLA / White

PLA / Black

Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste! Or you can use my multiple parts version to avoid filament waste!