Creality K2 Pro CFS Riser, Read Description!!

This mashup was created because there are very few practical and easy-to-print riser solutions for the Creality K2 Pro. The revised model is designed to be printed without support structures while offering additional functionality.

The riser not only provides a stable elevation for the CFS, but also features integrated holders for storing the build plates or the top glass plate directly in the riser device. This keeps the workspace tidy and ensures all essential components are within reach at all times.

Attention!

I recommend securing the CFS riser unit, for example with double-sided tape. I noticed slight back-and-forth slipping at high speeds.

Two steel rods are required; you can print them, but use them at your own risk!

Due to significantly higher stability and reliability, I strongly recommend using 8 mm x 300 mm steel rods.

https://www.amazon.de/dp/B0DFQ3SPPS 

I do not receive any commission for purchases made through this link.

Credits

The design is based on the model "Creality K2 Plus Dual CFS Riser" by Hi-Tech Redneck on MakerWorld.

Original model: Model ID 1403106

https://**********.com/de/models/1403106-creality-k2-plus-dual-cfs-riser#profileId-1455547

Special thanks to the creator of the design for allowing the publication of this remix model.