Qidi Plus 5 D3P riser - Single dryer extension shelves

These are shelf extensions for use with the Qidi Plus 5 D3P riser to allow mounting a single dryer top extension shelf.

The shelves are removable and include pins to lock them into place.

The shelf can be mounted on the right or left side of the riser - a profile is provided for each. Left and right are referenced as your left or right when standing in front of the printer and looking at it.

You can find more information about the Qidi Plus 5 D3P riser here: https://cults3d.com/en/3d-model/tool/d3p-riser-for-qidi-plus-5

3D PRINTING

PRINT SETTINGS

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model: Infill % : 15% (no need for more) Nozzle diameter: 0.4 mm Layer height: 0.2 mm standard Material: PETG