QIDI PLUS 5 D3P TOP MOUNT TPU SPOOL HOLDER

This is a top mount spool holder for use with the QIDI Plus 5 D3P riser. The spool holder mounts on the front of the QIDI PLUS 5 D3P riser. The spool holder is designed to optimize TPU printing by having the TPU filament feed directly into the hot end.

The TPU spool holder features:

Ball bearing spindle holder (two 608 2RS Ball Bearings are required); Quick and easy to install and remove; Filament guide to avoid tangling; Pins to secure the filament guide. A short piece of PTFE tube is inserted at the end of the filament guide to avoid snags;

You can find more information about the Qidi PLUS 54 D3P riser here: https://cults3d.com/en/3d-model/tool/d3p-riser-for-qidi-plus-5

ASSEMBLY

External hardware

Two 608 2RS Ball Bearings are required.

Assembly is simple.

* Tap the spindle ends into the spindle and onto the bearings. * The bearing and spindle fits into the bearing holder. * Place the bearing holder into the notch on the spool holder * Insert the filament guide onto the spool holder and secure with the included pins

The spool holder mounts on the front of the QIDI MAX 4 D3P riser . You will need to remove the glass.

To use: Disconnect the Bowden tube from the hot end. Install the spool holder on the QIDI MAX 4 D3P riser. Install the spool. The filament should unwind at the bottom of the spool and should be fed through the Bowden tube at the end of the filament guide.

3D PRINTING

IMPORTANT: I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.

I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.

3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more) Nozzle diameter: 0.4 mm Layer height: 0.2 mm standard Material: PLA and PETG are fine.