Ani Are You OK?

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben

Ani Are You OK? Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 3.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 PLA PolyTerra Army Brown Transmission Distance: 0.1 PLA BambuLab Basic Orange Transmission Distance: 5.2 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.2 PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 6 unique filaments

***attached .3mf file prints the first 5 layers at 0.2mm then the rest at 0.04mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #39 (1.68mm) swap to Blue Gray At layer #45 (1.92mm) swap to Army Brown At layer #47 (2mm) swap to Orange At layer #51 (2.16mm) swap to Sunflower Yellow At layer #60 (2.52mm) swap to Jade White for the rest.

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Boost Me If you like and enjoy the model and want to encourage me to continue to make more models like this, then send me a boost! Hope you enjoy! Thank you!