Audi Logo Lightbox

Nicer result with 2 mm nozzle.

Remove the purge lines before printing, otherwise they may be in the model.

All lids have two hanging holes.

Lid 1 with hole for a cable.

Lid 2 with battery compartment and switch, printed in PETG and PLA as support interface. I used M3 threaded sleeves to attach the battery cover. I used these battery compartments: https://www.amazon.de/dp/B0C2Q41DTT?ref=ppx_yo2ov_dt_b_product_details&th=1

For this you need a 5v LED strip and these switches: https://www.amazon.de/dp/B08CY41YT5?ref=ppx_yo2ov_dt_b_product_details&th=1

Lid 3 for a battery compartment with remote control. Just attach the front part a little with hot glue so that you can open it again to change the battery. The remote control works through the front. The lid is intended for this battery compartment with LED strips: https://www.amazon.de/dp/B08QCMFJW8?ref=ppx_yo2ov_dt_b_product_details&th=1

Unfortunately I have a few spots in the white because my print bed wasn't completely clean.