Folding Phone Tripod | 100% Printed (2026 Update!)

2026 Update (0.2mm layer, 2 walls, 20% infill) 20% infill for stiffness

Original Model Added skirt for legs, as they are very tall and need to be printed upright to avoid supports. All other parts can be printed with auto-orientation.

Longer Screw for Tripod 0.2mm layer, 2 walls, 15% infill This is simply a longer screw for the tripod

Portrait-size screw for iPhone Pro This screw is almost 19cm long, which should be plenty for any iPhone Pro size or below in portrait mode. The phone in the picture is an iPhone 12 pro, with a huge cover.

The screw fits on a A1 mini.

Ontop of that, the original screw had some kind of errors in the teeth that I fixed.

Optimized for strength: 5 walls -Legs oriented in stronger printing position (requires support, but worth it for strength)

-5 walls: thin areas print solid

-7 walls on legs add strength

-All phone stand parts fit on one A1 mini plate

-Gopro parts on separate plate

The hinge bumps on the legs may have to be trimmed slightly because of their print orientation, but all this is worth it for the added strength.

Very long screw for vertical phone orientation 215mm long Made this to fit my iphone 13 pro max vertically, as I will be using this for tiktok. Awesome tripod model.

0.2mm layer height

15% infill

Brim on to prevent warping

Legs Printed Horizontal - 0.2mm layer, 2 walls, 15% infill Legs printed horizontal to reduce failure with PETG. (I had trouble with the legs falling over.)

BETTER LEGS - 0.2mm layer, 5 walls, 20% infill Easier to print since legs are flatten on 2 sides ! More durable (profile settings + horizontal alignment) ! Plug-in knobs for smother rotation !

I really like the mount design but legs would print like garbage in any alignment for me.

Very long screw for vertical phone orientation 186mm long This fits a iphone 13 pro with a little room to spare, or a 13 pro max if you force it. I have uploaded a longer one even than this for max size phones.

0.2mm layer, 2 walls, 15% infill, brim to prevent warping

0.2mm layer, 2 walls, 15% infill Looong screw, fits A1 Mini I made a looong screw becuase my phone didn´t fit. It also fits on A1 Mini

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

PLA 0.2mm - Brim + support, 5 walls, 20% infill v3 Optimized for A1 with PLA. Added brim for better bed adhesion on the small contact areas, and added support under the bridge section to prevent the part from moving or failing during printing. Recommended for textured PEI plate.