Free 
Webcam Stand
MakerWorld
3D model · MakerWorld
Webcam Logi Brio 100 stand for slim edge monitor
Model details
- Platform
MakerWorld
- Price
- Free
- License
- CC-BY-NC-SA
- Non-commercial use only, with credit; share remixes under the same license.
- Formats
- 3MF
- 113 Likes
- 896 Downloads
- 602 Makes
- 410 Collected
- 31 Boosts
- 66 Comments
- 0 Views
Description
This nice webcam has two cons: a stiff cable and no capacity to pan, so I designed this stand to correct that.
The support has following features:
- Friction pan is stiffer than the cable stiffness, webcam will stay in place - Stand fits slim border screens, up to 2mm. - There is a “compartment” that allows to add ballast for better stability (use small nuts or pebbles). - Web cam is set back, to give a little more depth - Webcam is embed without modification by resilient claw. Compatibility List:
- Brio 100 - C 270
The design allows easy remixes, feel free to do I hope you will find it useful Give me news
Guides and print profiles
Print profiles and steps
0.2mm layer, 2 walls, 15% infill - I advise to support the box for hinge in the big bracket, no support for the “compartment”, no support else where. - On top works there are 1.75mm holes to block parts together by inserting filament, you may have to pass with a drill bit 1.7mm if you want hard fixation or 1.8mm if you want to keep the possibility to dismount the assembly - On foot drill one lug 1.8mm and 1.7mm the second lug, insert filament in the 1.8mm hole and push through the 2mm foot hole (no need to rework) make the hinge.
Similar models
Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.