H2D/H2S Right Angle Exhaust Vent 3in/4in(75/100mm)

The Bambu Labs H2D /  H2D Pro / H2S / H2C are undoubtedly awesome and LARGE! The vent is essential for clean air but the size of the printer makes the provided exhaust connection unfeasible in a lot of situations. This right-angle adapter will let you vent either directly LEFT OR RIGHT with the slimmest possible profile . 3 in / 75mm and 4 in / 100mm hose connections are available. Both models use the standard screws provided with the printer and are installed with the provided hex key.

The laser version of the printer comes with a 100mm hose as shown in the 4 in / 100mm pictures.

If you're looking to vent the non-laser version, here is 4in/100m hose: https://amzn.to/45Z3av5 or 3 in / 75mm hose can be purchased: https://amzn.to/45EePAu

If you have the space, the larger 4 in / 100mm connection and hose is preferred.

Need to vent out a window? https://amzn.to/47ZeKXN

Or move a lot of air over a long distance? (4in/100mm) https://amzn.to/4f1J8EN

or 3in/75mm version: https://amzn.to/4vKWZq8

I've also provided a model for a TPU gasket. If you'd prefer to laser cut a gasket, I made an adjusted profile here: https://makerworld.com/en/models/1746334-h2d-h2d-pro-h2s-h2c-exhaust-gasket#profileId-1856220

I made one from 2mm cork sheet but foam sheet would also work well.

Both sizes allow the automatic vents to operate freely, without modification.

*Update: Thanks to @LouisSanchez for the assist with the screws. Bambu doesn't sell the exact screws that come with the laser version but AA111 linked below work great.