Articulated Cute Turtle

Multicolor 4 Color 0.16mm layer, 3 walls, 15% infill Tips for printing:

- Filament: PLA - Supports: No! - Layer height: 0,15mm/ 0.16mm (normal Version) - Wall loops: 3 - Infill pattern: Aligned Rectilinear - Infill: 15% - Seam position: back - Wall generator: Classic - Detect thin walls: No - Brim: No! ⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Do not scale the Turtle any smaller otherwise the connections will no longer work!

If you apply too much force to the legs they may break!

Colors and filament I used (4 Color Version)

- PLA Matte / Green - PLA Matte / Black - PLA Matte / White - PLA Matte / Dark Brown Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

KeychainMulticolor 4 Color 0.12mm layer, 4 walls, 15% infill Tips for printing:

- Filament: PLA - Supports: No! - Layer height: 0,10mm/ 0.12mm (keychain Version) - Wall loops: 3 - Infill pattern: Aligned Rectilinear - Infill: 15% - Seam position: back - Wall generator: Classic - Detect thin walls: No - Brim: No! ⚠Warning⚠

Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

Do not scale the Turtle any smaller otherwise the connections will no longer work!

If you apply too much force to the legs they may break!

Colors and filament I used (4 Color Version)

- PLA Matte / Green - PLA Matte / Black - PLA Matte / White - PLA Matte / Dark Brown Or decide for yourself which colors and how many you want to use!

This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

0.2mm layer, 3 walls, 15% infill, x6 turtle for 6x4mm magnet - I scaled it down to 60 mm - manual paint the turtle shield - paint manual seam line - add ears for save bed adheason - change wall generator to arachne - adjust layer height to 0,2 mm for faster printing - insert a negativ cylinder for a for 6x4mm magnet in the head - insert pause