POLYZON
v2 Waterproof AA/AAA Battery holders + Canisters
v2 Waterproof AA/AAA Battery holders + Canisters — Image 2 of 8
v2 Waterproof AA/AAA Battery holders + Canisters — Image 3 of 8
v2 Waterproof AA/AAA Battery holders + Canisters — Image 4 of 8
v2 Waterproof AA/AAA Battery holders + Canisters — Image 5 of 8
v2 Waterproof AA/AAA Battery holders + Canisters — Image 6 of 8
v2 Waterproof AA/AAA Battery holders + Canisters — Image 7 of 8
v2 Waterproof AA/AAA Battery holders + Canisters — Image 8 of 8
3D model · MakerWorld

v2 Waterproof AA/AAA Battery holders + Canisters

Model details

Platform
MakerWorld
Price
Free
License
PRIVATE-USE
Personal use only: print for yourself, no selling or sharing.
Formats
3MFSTL
  • 307 Likes
  • 1 082 Downloads
  • 721 Makes
  • 990 Collected
  • 33 Boosts
  • 81 Comments
  • 0 Views

Author:Tresca3D

Published

Download on MakerWorld

Description

Version 2 of the AA and AAA battery holders. This updated models features a new design with a small lip that holds the TPU in place at the base of the threads to prevent falling off. The tolerances of the battery slots have also been improved to accommodate slight variations in battery dimensions. Threads have been updated smoother operation.

This model contains both AA and AAA holders, as well as, versions that do not have slots for batteries if you just want an open canister.

Disclaimer: I was able to achieve a water tight seal with the settings in the print profile on my printers. No two printers are the same. Waterproofing may very depending on materials and environment that the parts are printed in.

Guides and print profiles

Print profiles and steps

AAA Battery Holder - 0.2mm layer, 3 walls, 15% infill Standard Bambulab PLA Matte

- 0.2mm layer - 3 walls - 15% infill Bambulab TPU 95A

- 0.2mm layer - Concentric top/bottom and infill patterns

AA battery holder - 0.2mm layer, 3 walls, 15% infill Standard Bambulab PLA Matte

- 0.2mm layer - 3 walls - 15% infill Bambulab TPU 95A

- 0.2mm layer - Concentric top/bottom and infill patterns

All components - 0.2mm layer, 3 walls, 15% infill Standard Bambulab PLA Basic/Matte

- 0.2mm layer - 3 walls - 15% infill Bambulab TPU 95A

- 0.2mm layer - Concentric top/bottom and infill patterns

Large Canister - 0.2mm layer, 3 walls, 15% infill Standard Bambulab PLA Basic

- 0.2mm layer - 3 walls - 15% infill Bambulab TPU 95A

- 0.2mm layer - Concentric top/bottom and infill patterns

Smaller Canister - 0.2mm layer, 3 walls, 15% infill Standard Bambulab PLA Matte

- 0.2mm layer - 3 walls - 15% infill Bambulab TPU 95A

- 0.2mm layer - Concentric top/bottom and infill patterns

Tags

waterproofwaterproof 3d printwaterproof boxbatterybatteryholderbattery holderbattery holder aabattery holder aaaaaaaaaaa bateriesaabatteriestputpu 3d printcanistercanister bottleruggedrugged aestheticrugged boxbottlecasebattery caseoutdoor battery caseoutdooroutdoor casenomadnomad 3dedcedc battery
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.