Aboleth Miniature - RPG - DND- Wargaming - TTRPG

Boost Me Thank you all very much for your support, if you like this model and my work please leave a boost ^^ https://ko-fi.com/drakeforge3d   If you like my work and want to support me, I appreciate any support.

A monstrous ancient being with a long, ribbed, eel-like body. The Aboleth's head features a sharp, tooth-lined maw, three horizontally aligned eyes, and writhing tentacles extending from its face and sides. Its surface is covered with smooth, wet-looking skin, textured with fine organic ridges to help retain detail even on FDM printers. The tail curves upward for dynamic balance. Designed to print without a base , the model includes support touchpoints under the tentacles, jaw, and tail tip.

Optimal for 0.12–0.2 mm layer height. Tentacles are thick enough to avoid breakage, but detailed for organic feel. Ideal for resin scale-up, but fully FDM-compatible.

Suggested scale: 75–100 mm height (medium/large miniature)

Aboleth

(CR 10 – suitable for mid/high-level parties)

Attribute Value

Name Aboleth

Size/Type Large Aberration

Alignment Lawful Evil

Armor Class 17 (natural armor)

Hit Points 135 (18d10 + 36)

Speed 10 ft., swim 40 ft.

STR 21 (+5)

DEX 9 (−1)

CON 15 (+2)

INT 18 (+4)

WIS 15 (+2)

CHA 18 (+4)

Saving Throws CON +6, INT +8, WIS +6

Skills History +12, Perception +10

Damage Resist. Psychic

Condition Immun. Charmed, Frightened

Senses Darkvision 120 ft., passive Percep. 20

Languages Deep Speech, Telepathy 120 ft.

Challenge 10 (5,900 XP)

Abilities:

- Amphibious. Can breathe air and water. - Mucous Cloud. Creatures in 5 ft. radius must succeed on DC 14 CON save or become unable to breathe air for 1d4 hours. - Probing Telepathy. Aboleth always knows if it’s being lied to via telepathy. Actions:

- Multiattack. 3 tentacle attacks (melee, +9 to hit, 10 ft., 2d6+5 bludgeoning + disease). - Enslave (3/day). DC 14 WIS save or become charmed indefinitely. Targets can reattempt save after taking damage. - Legendary Actions (3/day): - Detect. Perceive through telepathy. - Tail Swipe. +9 to hit, 3d6+5 damage. - Psychic Drain. Targets charmed creature: 3d6 psychic damage, heals same amount.      Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT 2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

- Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

-

Recommendations:

- - 0.08-0.2. In the event of changing the original height, the height of the supports should be changed. - PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

- Clean the plate thoroughly before printing. Make sure the filament is dry and free from dirt. This can damage the print or weaken the support