Skeleton Cat Cute- Kawaii - Toy - Halloween

Skeletal Cat

A ghostly feline that always lands on all four bones! This skeletal cat combines cuteness with a chilling vibe, making it a perfect shelf companion or spooky display piece. Detailed and eye-catching in white and gray PLA, available in single-color and multi-color options. Easy to print and assemble with just a bit of glue. Download and add a purr-fectly eerie companion from the afterlife!

Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT 2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

- Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

Recommendations:

- - 0.08-0.2. In the event of changing the original height, the height of the supports should be changed. - PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

- Clean the plate thoroughly before printing. Make sure the filament is dry and free from dirt. This can damage the print or weaken the support