Tanjiro Hueforge - Demon Slayer

Boost Me Un petit clic sur “Boost” et tu m’aides énormément — sans rien dépenser ! Merci pour le soutien ❤️ A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️ Membership Avec le membership, tu peux vendre toutes mes impressions en toute liberté ! Un vrai coup de pouce pour mon travail ❤️ Merci !

With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you! N’oubliez pas de télécharger l’outil de fixation murale ci-dessous :

Don’t forget to download the wall mounting fixture below:

https://makerworld.com/en/models/1406641-wall-mounting-fixture-for-hueforge-hexagonal#profileId-1459640

Soyez vigilant si vous utilisez un PLA différent de celui indiqué, les niveaux de distance de transmission peuvent varier et ainsi affecter le résultat.

Attention if you use a different PLA than indicated, the transmission distance levels may differ and thus impact the result.

Project: Tanjiro.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x208.16mm in size You may print at higher layer heights below the Base Thickness of 0.96mm The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

Filaments Used: PLA BambuLab Basic Black  Transmission Distance: 0.6 PLA BambuLab Basic Bambu Green  Transmission Distance: 2.8 PLA BambuLab Basic Red  Transmission Distance: 4 PLA BambuLab Basic Jade White  Transmission Distance: 5 PLA BambuLab Basic Yellow  Transmission Distance: 5.5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Bambu Green At layer #16 (1.36mm) swap to Black At layer #17 (1.44mm) swap to Red At layer #23 (1.92mm) swap to Jade White At layer #24 (2mm) swap to Yellow At layer #26 (2.16mm) swap to Jade White for the rest.

Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo

How to print more than 4 colours with a single AMS: from 42 sec onwards in the video