Itachi Uchiha, Naruto, Framed Cutout Bookmark

This is a perfect representation of Itachi Uchiha from Naruto Shippuden with his signature red Sharingan eyes and somber demeanor. The red Akatsuki clouds motif attire as crows manifest themselves from him completes the look. This is a must have for Naruto fans.

Itachi Uchiha, Framed Cutout

Pictures shown are printed in an 0.2mm Nozzle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA BambuLab Basic Black  Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray  Transmission Distance: 3 PLA BambuLab Basic Maroon Red  Transmission Distance: 1.6 PLA BambuLab Basic Beige Transmission Distance: 3.7 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer (0.96mm) swap to Blue Gray At layer (1.12mm) swap to Maroon Red At layer (1.36mm) swap to Beige for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked , adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale , adjust the Z axis back to 100% , slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.