Lady Ganster Hueforge

0.08mm layer, 2 walls, 100% infill Project: lady gangster.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120x176.83mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.4mm and the Actual Thickness is 1.59472mm

Filaments Used:  (* = Owned) #658697 * PLA Overture Gray Blue  Transmission Distance: 6.5 #080a0d    PLA PolyLite Black  Transmission Distance: 0.1 #ffffff * PLA BambuLab Basic Jade White  Transmission Distance: 6.8 This print uses 3 unique filaments

Swap Instructions: Start with Gray Blue At layer #6 (0.56mm) swap to Black At layer #10 (0.88mm) swap to Jade White for the rest.