Knitted Reindeer - Christmas

Separate Parts, 0.12mm layer, 2 walls, 8% infill No AMS needed!

Parts need to be glued in.

AMS, 0.16mm layer, 2 walls, 7% infill Assembled model

P2S, P1S|One Plate|Original Size|0.16mm layer|2 walls - Layout Consolidation Protocol: - The Upgrade:  The entire model set was consolidated from the original  four separate build plates down to a single, highly-optimized plate  with full  AMS utilization . - Result:  This strategic reduction  eliminates three time-consuming plate swaps  and drastically cuts down on manual preparation, resulting in a  significant and measurable saving in overall print time and user effort . - Print-by-Object Strategy (Critical Safety Feature): - The Upgrade:  The print sequence is set to  "Print-by-Object" (Object Sequencing) . - Result:  This is a  critical reliability upgrade  for printing multiple, small, separated components. It  eliminates the risk of the print head colliding  with already completed parts, ensuring a  high-success-rate, fail-safe print  without needing enclosures. - Low-Waste Flow Protocol (Material Economy): - The Upgrade:   Retraction settings were meticulously tuned  for  Bambu PLA Basic  and the AMS flow. - Result:  This fine-tuning is focused on achieving a  clean-flow state  to minimize stringing and material residue, which directly results in  less required flushing volume  during color changes. This provides a  massive, verifiable reduction in filament waste  for the user (Low-Waste Production). - Optimized Structural Efficiency: - The Upgrade:  Infill set to  Gyroid  (with appropriate density, e.g., 8%) and print speeds were fully optimized. - Result:  Gyroid provides excellent multi-directional support for the decorative set. The profile's overall tuning ensures the  fastest possible total print time  (due to the consolidation and P2S optimization), ensuring the entire set is produced efficiently.

0.12mm layer, 2 walls, 15% infill Renna ingrandita al 300%

Riempimento abbassato da 15% a 8%

0.12mm layer, 3 walls, 4% infill - ridimensionato tutto al 150%

- 2 piatti ottimizzati per AMS

- infill gyroid al 4%

Mini single color version - 0.12mm layer, 2 walls, 7% infill

One Platte; Print By Object; No Waste This profile allows quick and easy print by object from Bambu Handy. Load colours into AMS, hit print, assign colours. All objects are printed seperately on one plate. Assemble as per the multi plate model.

AMS recommended, but it's only 3 filament swaps if you want to do it manually and you'll still save some time and add some convenience over printing the plates individually.