Cable reel SUNLU GEN 3

Cable reel for SunLu gen 3 spool

Only 114 g and 4.5 hours, and you can make use of an extra filament spool!

The cable reel is durable and designed so that it does not rotate unless you turn it. In addition, if you wish, you can print a rotating roller that fits perfectly into a Sunlu filament spool. I printed this from PETG.

Spinner assemble:

1. Insert the male threaded piece inside the reel, aligning it with the holes

2. Insert the plate piece through the threads

3. Screw the female thread onto the male thread so that the rotating part is around it

Reel assemble:

1. Open the old filament spool and place it with the side that has the wider center facing toward the reel

2. Screw the lid’s threads onto the reel through the center of the spool.

3. Attach the spool halves to each other

4. Make sure the recesses are aligned, meaning the spool is installed in the correct orientation.