Hand Towel Ring Holder Modern Aesthetic Design

This minimal towel ring holder is designed for a clean look and solid strength. Due to the round/curved underside , supports are required to get a neat internal surface and a “publish-ready” finish.

Highlights

- Clean, minimal design - Strong print with multiple wall loops - Best results with Tree supports + 0.16 mm layers (or Variable Layer Height) Material

- PLA / PLA+ (eSUN+ works great) - PETG also works if you need more durability in humid bathrooms Recommended print settings (Bambu Studio)

- Layer height: 0.16 mm (extra smooth: 0.12 mm ) - Walls: 4 - Top/Bottom: 6 - Infill: 25% Gyroid - PLA+ temp: 220–225°C nozzle | 55–60°C bed - Fan: 80–90% after first layers - Optional: Brim 6–10 mm Supports (recommended)

- Support: ON - Type: Tree - Placement: Build plate only - Overhang: 50–55° - Density: 10–15% - Interface layers: 3 - Tip: use Paint-on supports to keep the outer surface clean