Double Wall Hook | Coat Hanger | Towel Rack

Check out my newly released models:

Universal Headphone Hook

Backpack Hanger

-----------------------------------------------------

My wall hook with its ribbed design has been well-received and some have asked for a double hook version. Here it is. This is a multi-purpose wall hook. It can be used as a coat hanger, towel hanger, bag hook etc. If you are planning to use heavy items, I would highly recommend the screw mount version.

Boost Me I put a lot of time and effort into designing and testing my models. If you like my work, give it a boost to help me continue. Do you want to sell 3D prints of my designs or support my work? You can also join my commercial membership on Patreon 🎉

There are 2 versions:

1- Double-sided Tape Version:

There is a slot on the back on this version. The slot accepts maximum 17mm wide tape (smaller also works) . The slot is textured. Thick & transparent tape will stick significantly better to a textured surface as opposed to a smooth one with PLA, PETG etc. I've tested this very extensively across 5 different models which have a total print count of 30,000+. I would highly recommend thick & transparent double-sided tape (sometimes has red lining) because foamy ones tend to leave residue, and thin ones are not strong enough: Link to the recommended double-sided tape .

2- Screw Mount Version:

This one comes in two pieces: The hanger itself and the mount. The mount has slots for 2 screws. These have 8.5mm diameter entry and 4.4mm exit to fit various screws . Before screwing the mount in, make sure the parts fit together. The fit is quite tight to prevent wobble. If it's too tight with your particular printer & filament, you can sand down the little nibs of the mount. Before mounting it to the wall, make sure to insert and remove it a couple of times to make it fit smoother. If you are having a hard time removing the mount from the hanger, just push it out with a screw driver or something similar. There are slots for doing exactly that.

Dimensions: 21.6 × 35.6 × 118mm (X × Y × Z)

-----------------------------------------------------------

Check out my other models:

Foldable Small Smartphone Stand

Shower Wall Hook

Toothpaste Squeezer

Mini Bag Clip v2

Compact Phone Stand

Belt Hanger | Belt Hook

Clothes Hanger Connector Hook

Over the Door Hook

Mini Desktop Trash Bin - Fast Print (Vase Mode)

Auto-locking Hanger (Ribbed)