M12 Washers & Spacers - 1.2mm to 25mm

A complete set of precision spacers and washers designed specifically for M12 screws (easily adaptable to M12). These aren't just simple cylinders; they have been engineered for a perfect fit and professional finish.

Key Features:

- Built-in Tolerance: Each washer features a 0.5mm internal clearance (12.5mm total ID for M12). This ensures the screw slides through smoothly even with standard 3D printing hole shrinkage. - Top Countersink: A subtle 1.2mm chamfer on the top edge removes the sharp "lip" from printing and helps guide the screw during assembly. - Standard Dimensions: Designed with a 24mm Outer Diameter (OD) for M12 to match standard hardware proportions. - Organized Plates: The project is divided into plates by height for easy selection. Available Heights:

This kit includes the following sizes: 1.2mm, 2.4mm, 5mm, 10mm, 15mm, 20mm, 25mm.

Recommended Print Settings:

- Material: PLA, PETG, or ABS/ASA (for heat resistance). - Infill: 100% (Highly recommended for structural spacers to prevent compression). - Wall Loops: 3 or 4 for maximum strength. - Print Sequence: Set to "By Object" if you are printing many at once to reduce stringing and improve surface quality. Instructions:

- Open the .3mf file in Bambu Studio. - Select the Plate corresponding to the height you need. - Each plate is named by height (e.g., "M6 - H 5mm"). - Hit print and enjoy your custom hardware!