FF8 Logo HueForge

0.08mm layer, 2 walls, 15% infill Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm

The Model is 200x110.55mm in size

You may print at higher layer heights below the Base Thickness of 0.3mm

The Max allowed Thickness is 1.7mm and the Actual Thickness is 1.69453mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5

#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:

Start with Black

At layer #5 (0.6mm) swap to Cocoa Brown

At layer #7 (0.8mm) swap to Red

At layer #9 (1mm) swap to Pumpkin Orange

At layer #10 (1.1mm) swap to Yellow

At layer #11 (1.2mm) swap to Jade White for the rest.