Bubble alphabet wall art

3D Bubble Alphabet – Complete Alphabet (A-Z) on the Wall. You can find numbers here and fuzzy look letters here . Bring life to your child’s room, playroom or study with these cute 3D letters! The letters have a modern, completely rounded “bubble” shape, which makes them look like soft cushions or balloons on the wall. No sharp edges, a beautiful organic and fluffy look.

This model contains the complete alphabet from A to Z, so you can easily put together any name or inscription. Ideal for children’s names above the crib, room markings or creative claims. Or you can stick magnets on the back and make words with the kids.

Flat back: The letters are flat on the back, so they fit perfectly on the wall and are easy to stick (e.g. with double-sided tape).

Easy scaling: You can enlarge or reduce the letters in Bambu Studio to suit the space on the wall. The letters are around 100 mm high and 30 mm thick (of course, not all of them are the same height), so always use the same percentage (not millimeters) values to adjust the size.

Recommended print settings They look great with matte filaments – Matte PLA , which will emphasize the “pillow” look. Print flat side down on the plate. Supports are not needed. For fast standard printing, a layer height of 0,2 mm (blue-colored letters) is enough. However, for smoother layer transitions, you can also use a second profile with a layer of 0,12 mm and an adaptive layer height setting (green-colored letters). Or you can use filler, sand and spray with any color you want. Pouring with UV cured resin will also create a beautiful look. The infill is set to a 10 % grid and is sufficient (with a density below 7% and gyroid, I had worse results).