Apache 2800 All In One Insert-Modular BRD Remix

This is a remix of shimmy's excellent Apache boombox 2800 case insert.  I have modified it to move components to different locations in the insert placing the power related items and user exposed controls (power button, voltage meter, buck converter and recharge port) on the left side (battery side) and the audio/visual components on the right side module.  I've also built in a snug battery cage for my specific battery choice.

Build all parts top down;  If your bed isn't big enough for the floor, angle one end up to approx 40 dgrees and use tree/slim supports.

Build with:

- PETG - 4 wall loops - 30% cubic infill - Supports: tree slim if tilting the build plate, otherwise no supports required

Alternative Model Files included:

- Left module with recharge port outside box - mount port socket on the horizontal midline of left side of the box; install assembled insert with slot over the recharge port. - Left module with no power or voltmeter mounting holes - per user request

Supplies:

- Requires 4m heat set thread inserts for the side modules - 4m x 10mm hex cap screws to assemble the insert modules

Components this insert accommodates:

Amplifier Wuzhi Audio ZK-1001U https://www.amazon.com/dp/B0FD9D7SR6?ref=ppx_pop_dt_b_product_details&th=1

Battery 24V, 10A max; 5Ah with 2A charger https://www.amazon.com/dp/B0FHPST5TP?ref=ppx_pop_dt_b_product_details&th=1

DC Voltage Gauge 12V/24V https://www.amazon.com/dp/B0F24KJR2G?psc=1&ref=ppx_pop_dt_b_product_details

Switch 16mm latching with LED;12V/24V, 15A; https://www.amazon.com/dp/B0FVC9R3C3?ref=ppx_pop_dt_b_product_details&th=1

Charge Port Barrel Socket Female, 2.1mm,  2A minimum https://www.amazon.com/dp/B09H5L3KN5?psc=1&ref=ppx_pop_dt_b_product_details

The original project contains a comprehensive installation PDF which is a good reference to assemble this remix.  It also contains details about the heat set inserts and screws required to assemble the 3 pieces.