3D model · MakerWorld

GETAWAY GARAGE 1:64 Car Display Diorama

Model details

Platform
MakerWorld
Price
Free
License
PRIVATE-USE
Personal use only: print for yourself, no selling or sharing.
Formats
STL
  • 0 Likes
  • 0 Downloads
  • 0 Makes
  • 0 Collected
  • 0 Boosts
  • 0 Comments
  • 0 Views

Author:brick

Published

Description

GETAWAY GARAGE 1:64 Car Display Diorama

A 106 x 85 mm garage bay for a separately supplied 1:64 diecast car.

Design and use

A 106 x 85 mm garage bay for a separately supplied 1:64 diecast car. Slatted rear wall, side wall, entry plate and raised GARAGE sign. Additional bays can be arranged side by side; loose underside joining clips bridge neighboring 4 mm floor edges. This is an original fan-inspired neon-city design, not official Rockstar merchandise.

Included STL parts

- garage_floor: 106.0 × 85.0 × 4.0 mm - slatted_back_wall: 106.0 × 59.0 × 3.7 mm - side_wall: 81.0 × 59.0 × 3.0 mm - entrance_ramp: 44.0 × 22.0 × 3.0 mm - garage_sign: 72.0 × 17.0 × 2.95 mm - joining_clip_1: 14.0 × 16.0 × 5.0 mm - joining_clip_2: 14.0 × 16.0 × 5.0 mm

Guides and print profiles

Print profiles and steps

0.20mm layer, 3 walls, 15% infill — A1 Bambu A1, 0.4 mm nozzle, 0.20 mm layers, Bambu PLA Matte, Textured PEI Plate, 3 walls, 5 top/bottom layers and 15% gyroid infill. Supports are disabled in the supplied profile. Estimated complete set: 1 h 34 min; 70.09 g PLA.

Tags

More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.