Box - small and print in place

Easy close version This print profile has a couple of small modifications, via primitives and boolean operations in the Bambu Studio, to ensure that the box closes easily without having to align the lid. I've also added some minimal support to the clip bar to prevent stinging on the underside, which I found happens with some filaments. This profile makes this very nice model even better.

Pro-Hinges 0.2mm layer, 3 walls, 15% infill Added some extra tolerance for hinges to improve their printability.

0.2mm layer, 3 walls, 15% infill

Pro_Hinges_PLA_Speed_Optimized I’ve fine-tuned the settings to achieve the ideal balance of speed, efficiency, and strength—with minimal compromise on quality.

0.2mm layer, 2 walls, 10% infill

CF記憶卡盒

0.2mm layer, 3 walls, 15% infill Easily printed, perfect design, works very well.

+1000% AURA RUGGED USB BOX 55x55 mm Print-in-Place Rugged USB Box

A compact and durable storage box designed to hold up to 4 USB drives. This model is fully print-in-place with a working hinge right off the printer – no assembly required. +100000 % AURA with your friends

Specifications

- Dimensions: 55 × 55 mm - Weight: ~25 g (PLA) - Print time: ~55 min - Capacity: up to 4 USB drives, maximum length 48 mm - Optimized for SanDisk Ultra Dual Drive Go Features

- Print-in-place hinge, no supports required - Strong and portable design, ideal for everyday use or travel - Recommended to place a thin piece of foam in the lid to keep USB drives securely in place Material recommendations

- PLA or PETG for everyday use - ABS or ASA for maximum durability and heat resistance

Toothpick Ammo Crate - 0.2mm layer, 3 walls, 15% infill Need a place to store your toothpick ammo for your Toothpick Launcher Print-in-Place ? This is just the Profile Print for you!

You don't want to leave them on the floor and risk stabbing your foot. Ouch.

CyberBrick Train mod This box is perfect for holding parts for the CyberBrick Train.  I scaled it up and added a logo.  It pairs very well with the “CyberBrick Train Parts Holder” I designed for this box. AMS required, no supports.

milwaukee 0.2mm layer, 2 walls, 15% infill

0.18mm layer, 2 walls, 15% infill I enlarged and stretched the box to fit the holders for this filament swatch profile, https://makerworld.com/en/models/1923339-filliment-card-with-14-tests-15-minute-print#profileId-2063898.  I found you can split the objects in Bambu studio and export to then resize the individual parts easily.  I'm pretty new to tinkerCad so it's not perfect, but definitley working.

Larger version for 18650 batteries Modified to fit 4 18650 batteries. Fits anything that is about the same size with a max size of 22mm x 70mm. For example: Vape liquid containers fit perfectly in this.

0.16mm layer, 3 walls, 15% infill

Optimized and improved version, larger size 15.8cm

Pro_Hinges_PETG_Speed_Optimized 🚀 PETG  Speed Optimized ( A1 mini compatible)

A speed-optimized PETG  profile focused on fast printing while maintaining a good balance between print quality, strength and reliability.

🔗 Also available PLA Speed Optimized !

You can find it on my profile or in the Print Profiles section of this model.

If you find the profile useful, a Like 👍 is appreciated!