Beer Soda Can Opener & Lid Saver Cap & Keychain

PLA ~ 0.2mm layer, 2 walls, 15% infill Quick Print:

NO supports

Time: 13 mins

Filament: 2.7g Black PLA+

PETG ~ 0.16mm layer, 2 walls, 15% infill Quick Print with NO supports

Time: 17 mins

Filament: 3.2g Translucent CLEAR PETG (BambuLab)

Part printed in vertical orientation Adaptive layer

0.2mm layer, 3 walls, 15% infill with magnet holes Habe dem Originalprofil lediglich Löcher für zwei 4mm Magneten hinzugefügt und die Wandlinien auf 3 erhöht. Druckprofil mit Pause bei Layer 12.

Perfect Quality - 0.1 Layer - 2Gram ⚙️ Print Settings

- Layer Height: 0.10 mm - First Layer: 0.10 mm - Supports: Not Required - Brim: Disabled

0.2mm layer, 3 walls, 15% infill Added a spot for a 6x3 magnet

No pauses needed

Made it longer so the can is easier to open. I modified the original soda can opener by extending the handle to make it much longer . The shape and opening mechanism stayed mostly the same, but the added length improves how the opener works.

The longer handle is better because it:

- Provides more leverage , making the can easier to open. - Requires less force , so opening the can takes less effort. - Gives you more room to grip , making it more comfortable to hold. - Makes the opener easier to control while lifting the tab. - Works better for different hand sizes because there is more space to hold it. Overall, the longer design makes the soda can opener more comfortable, easier to use, and more effective than the original.