Free 
Root
MakerWorld
3D model · MakerWorld
Cauldron
Model details
- Platform
MakerWorld
- Price
- Free
- License
- PRIVATE-USE
- Personal use only: print for yourself, no selling or sharing.
- Formats
- STL
- 18 Likes
- 5 Downloads
- 2 Makes
- 25 Collected
- 1 Boosts
- 0 Comments
- 0 Views
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 6 unique filaments. Substitute as needed.
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #7 (0.64mm) swap to Gray At layer #10 (0.88mm) swap to Jade White At layer #13 (1.12mm) swap to Black At layer #18 (1.52mm) swap to BambuLab Green At layer #20 (1.68mm) swap to Yellow for the rest.
Boost Me Got a Boost to spare? Every little bit helps the motivation. Thank you!
Membership Want to go commercial or maybe just show some love? Consider signing up to show support!
Guides and print profiles
Print profiles and steps
0.08mm layer, 2 walls, 100% infill
Similar models
Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.
Comments