Free 
Egg holder-Egg stand with changeable label MHD/BBD
MakerWorld
3D model · MakerWorld
Egg Dispenser by ljhtom
Model details
- Platform
MakerWorld
- Price
- Free
- License
- CC-BY-NC
- Print and modify for yourself with credit; no selling the model or prints.
- Formats
- 3MF
- 4 035 Likes
- 10 956 Downloads
- 5 957 Makes
- 11 149 Collected
- 375 Boosts
- 739 Comments
- 0 Views
Description
Egg Dispenser by Ljhtom, BambuStudio -Ready!
-Always have fresh eggs, thanks to this dispenser, fill the dispenser with 12 XL size eggs, maybe 13 or 14 other sizes. - (TPU) Optional anti-fall stop and slowdown stop, it is not necessary, but it gives more security . -Glue and assembly needed -72mm wide / 296mm deep / 151mm tall.
Made by: “Ljhtom” on Thingaverse and Printables
10% Infill (grid, for more strength) 0,2mm LH 2 walls 0,4 nozzle
Guides and print profiles
Print profiles and steps
0.2mm layer, 2 walls, 10% infill ( TPU parts are optional ) -10% Infill -0,2mm layer -2 walls PLA or PETG for structure.
ABS 0.2mm layer, 2 walls, 10% infill speed 50%
0.24mm layer, 2 walls, 10% infill
PETG - 0.2mm layer, 2 walls, 10% infill PETG
0.2mm layer, 2 walls, 10% infill
only pla version
1 tall part without glue (for bigger printers) If you have a bigger printer like H2 series you can print the egg dispenser in one part. I assembled the creator-given model into one part. If you view the layers in the section where the former seperate parts meet you can see some oddities but it prints fine.
Make sure to have good bed adhesion because you are printing a rather slim butt very tall part.
Similar models
Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.