Cute Flexi Pets Chameleon (Keychain & Magnet)

[For Maker's Beginner Kit] 0.16mm layer, 2 walls, 15% infill hii, in this print profile you will find a different version for each plate. From the app you can decide whether to print in single color or multicolor, and you can also duplicate the object as many times as you want. Hope you like it! 🤗

Disclaimer: This model is compatible with the Maker's Beginner Kit B-ZC002 . The kit includes various non-printed parts to accommodate multiple popular models. As a result, some parts may not be necessary for this specific model. If you only need to purchase the non-printed parts required for this model, please uncheck the Kit option when making your purchase.

Mono Color, 0.2mm layer, 2 walls, 0% infill Mono Color, Fast print, 0.2mm layer, 2 walls, 0% infill, slowed down initial layer for better adhesion, A1 mini

0.2mm layer, 2 walls, 15% infill Reduced scale and increased layering. For a smaller object, less waste and time. Perfect for coloring with acrylic markers. If you are satisfied, please rate the profile. Thank you.

Print by object - requires assembly. Faster and less waste. Same as original 4-magnet version, just the different parts detached. Needs glue and a bit of patience for assembly.

Reduces printing a single multi colored chameleon from 3h→1h and 49g→15g.

With a little copy paste work you should be able to print multiple on the same bed.

Photo shows after assembly.

50 % sice version 50% version of the model

RESIZED 140%, 0.2mm layer, 3 walls, 10% infill