Stormtrooper Hueforge Bookmarks - 2 sizes

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben

Stormtrooper Hueforge Bookmarks - 2 sizes

Large 65mm x 200mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x200mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 2 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Jade White for the rest.

Small 50mm x 150mm Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.03x150mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 2 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Jade White for the rest.

More Bookmarks can be found here

Hueforge Bookmark Book Nook can be found here

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Boost Me If you like and enjoy the model and want to encourage me to continue to make more models like this, then send me a boost! Hope you enjoy! Thank you!