Tablet / notebook / e-reader desk stand

Membership Sell physical prints of this model legally with a 3DPartTech Commercial License. Hey there,

Another day, another model! This time I created a tablet / notebook / e-reader / Remarkable stand for on my desk that can be adjusted in angle and in height!!! Assembly is really easy and quickly done. Just make sure you are there when printing plate number 2! I added a pause to the knobs as 3 nuts need to be pushed in the holes. After you have done that just resume the print. As not all nuts are exactly the same height check that the nut does not stick out above the already printed knob before resuming! I also added caps for covering the hex bolt head.

Parts you will need are:

2pcs. M8x40 bolt

1pcs. M8x20 bolt

3pcs. M8 nut

Check out the list below for the beautiful Metal PLA I used!

Thanks for your support and don't forget to give me a boost when you can!