Mickey and Minnie Mouse Love - Bookmark Set

Mickey and Minnie Mouse Kiss Bookmark Set

A set of two of our favorite mice in love. Use gold or a skin color at layer 19 . The faces only have one layer to define their color. You can add one layer at 19 and change to yellow at layer 20 if you like. Yellow all the way from 19-23 makes Mickey and Minnie looks sick.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked , adjust the Y axis to the desired size (180max for A1 mini and 250max for P1/X1, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale , adjust the Z axis back to 100% , slice plate, and print. Stringing may occur with HueForge, just use a lighter to whisk them away.

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gold Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At height depth (0.88mm) swap to Red At height depth (1.28mm) swap to Jade White At height depth (1.6mm) swap to Gold At height depth (2mm) swap to Jade White for the rest.