Mac M4 Mini VESA Mount - 75mm or 100mm
3D model · MakerWorld

Mac M4 Mini VESA Mount - 75mm or 100mm

Model details

Platform
MakerWorld
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
STL
  • 29 Likes
  • 107 Downloads
  • 48 Makes
  • 69 Collected
  • 3 Boosts
  • 6 Comments
  • 0 Views

Author:gprguy

Published

Download on MakerWorld

Description

A quick remix of the Mac Mini M4 VESA mount that adds the 100x100mm VESA pattern while keeping the original 75x75mm as well.

I used M4 0.7 12mm long hex button head screws to attach to my monitor, but that will vary by manufacturer. Consult your monitor's documentation.

Printed with ASA with HIPS support interface. That's likely overkill but something more heat resistant than PLA is probably a good idea for your expensive Mac Mini. PETG would likely be a good compromise.

There may be a warning about the prime tower but it printed fine for me with it moved inside the model. That meant less build plate to glue (if you need glue) and less head travel. It's easily moved if you run into issues slicing.

Guides and print profiles

Print profiles and steps

0.2mm strength preset with manual painted supports - 0.20mm Strength Profile - Supports enabled, manually painted - ASA with HIPS supports - Should work fine with other materials/support interfaces (or no support interface)

Tags

macminimacminim4vesamonitor accessory

Comments

Loading comments…
More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.