Nintendo Switch 1 & 2 - Game Display Storage

18 Slot Version Go BIG or go home!!! new for 2025 18 Slot version :)

Same as the 6, 10 and 14 slot version but this one is now 18 slots and slightly stronger walls

ignore the colour used on example not the best look.

18 Slot Version - Wall Mount 18 Slot Version - Wall Mount Version

Note if you don't want to wall mount then please use the non wall mount version as this is a smaller print required thanks.

14 Slot Version 14 Slot Version - Single colour no AMS required (not for A1 Mini)

14 Slot Version - Wall Mount 2025 Wall Mount Version for 14 Slot (thicker walls)

This is the wall mountable version so is a longer print and uses slighly more material, if you don't need wall mount then select the non wall mount versions in the print profiles.

There are 2 ways of helping you mark out for distance between brackets

- pre-fixed with a thin strip of plastic which can be used to give distance for marking on wall before drilling. - see image - you can use the 2nd wall in from either side to align - just use middle of 2nd row in and mark with pencil on wall. then drill this should be the exact distance required. Any feedback i.e. improvement etc please comment.

I have tested this and works a treat, also very strong as you can see in image i rested another 14 slot on top and no issues.

Skadis wall mount adaptors - fits 14 slot only (tested) - These plates replace the wall mount plates - these are a direct replacement so no need to re-print the main 14 slot base unit. - fits the 14 Slot Wall Mountable unit, these plates replace the wall mount plates. - Fits standard Skadis wall organisers. - Note there is a Left and Right plate - they are labelled. - Only tested on 14 slot version - not yet tested on 18 slot but let me know if works or not.

10 Slot Version Supports the A1 Mini so 10 Slot version of the original.

6 Slot Version