Face Shield CV11

This is a face shield (PPE) that implements following design considerations.

- Front plastic sheet attaches inside .

- Top cover sheet attaches outside, making "eaves".

This design prevents droplets coming from the top to enter the inside (dangerous) more effectively than traditional designs that attach the sheet outside.

- This design doesn't print tall parts like a built-in top cover, i.e. it prints relatively fast (70 min with stock Prusa MK3S, 0.3mm layer height). Plus, top cover doesn't break easily with horizontal pressure applied, i.e. assembly is easy.

- Small printer friendly (Makebot / FlashForge / QIDI).

- Front sheet is compatible with "Sweden" 3DVERKSTAN visor North America 6-hole version.

Models

======

- Frame (printed)

- Headband (printed)

- Top cover (either printed or cut)

- Front plastic sheet (cut) - compatible with DVERKSTAN visor North America 6-hole version.

Front plastic sheet and top cover can be cut from a single 12x12 plastic sheet at once. Example CriCut project has been shared in Design Space "Face Shield CV11" project . Otherwise please refer to SVG files or drawings for dimensions.

BOM

=====

- 1x 12-inch x 12-inch clear plastic sheet. (7mil/0.18 mm thickness recommended.)

- 1x Rubber foam tape (3/8 inch/12mm wide) for protecting forehead.

Acknowledgments

==============

- 3DVERKSTAN - My model is inspired from their great work that is published under CC-BY-SA 4.0. I highly admire their great work!