PC4-M10 to PC4-M10 coupler (x5) wall mount for MMU

The way my setup is done, I have a shelf where by drybox and spools are. My printer is under it and needed a way to get the filaments down there, while printing from the drybox. I did a few holes in the shelf and designed this coupler to be able to easily switch filament and feed lines.

Model:

There are 2 variances to this model. The regular model and the low profile version.

If you dont need the extra space from the wall you can use the low profile version. The regular one will give you about 1 inch space between wall and tubes.

Files:

I have included a STL and a 3MF file for each models. If you are using a MMU, you can use the 3MF and paint the numbers easily as they are separate objects. You can also use the STL file and add a color change at layer 158 for the regular model or layer 73 for the low profile version.

Material Needed:

- 10 x PC4-M10 coupler - 2 x 1.5" Screws - PTFE Tubing. I am using Clear 3mm ID x 4mm OD Printing:

- I used Overture PLA , and it is more than strong enough. Feel free to use other types. - No supports. - 0.2mm - 15-20% infill is recommended. - Print time: 2 hours