MtG - Commander Deck Box (Compact/Stackable) - Holds 100 Standard Cards

This compact box can snuggly hold a sleeved deck of 100 TCG standard sized cards (2.5 in x 3.5 in / 6.4 cm x 8.9 cm), with an additional space for tokens, dice, etc. There is an optional basic box version with no divider that can be swapped out in the slicer if you want a version with extra space. A sleeved card can be placed in front slot. Boxes are stackable, so they're great for storing your decks efficiently. Lids are interchangeable, and can be used with all box variants. These boxes were originally created for a Magic the Gathering Commander Deck.

Optional Patterns * :

- Dragon Eye

- Dragon Scale

- Flagstone

- Gothic Church (With or Without Windows)

- Mermaid

- Pusheen

- Sakura

- Waves

* Patterns applied via PrusaSlicer. In the slicer you can “Replace with STL” the TCGCardBoxLid file with the Basic version if you want to switch out the icons. Works great for multi-material printers.

Printing Suggestions:

- Grid Supports work well for the box

- Concentric top/bottom fill pattern

- Seam position, random

- Enable Ironing, topmost surface only

- If the lid is too tight/loose, try adjusting the XY Size Compensation

Let me know if you would like additional lid options and I'll see what I can do. This box was inspired by the MTG Commander Deckbox, 100+ .

Updates: (2025/12/31) Added a basic box with no divider. (2025/8/15) Adjusted the basic box model to improve printing results. Added Sakura pattern. (2025/4/14) Added Dragon Eye, Pusheen, and Waves pattern. (2025/02/17) Added a Gothic Church and Flagstone pattern. Made box a little taller to accommodate larger sleeves. (2025/01/19) Adjusted a few of the lid models, added a basic Pokémon Logo lid.