Prusa Core One Webcam Mount for Logitech C920/C930 (for 6x2mm magnets)
Prusa Core One Webcam Mount for Logitech C920/C930 (for 6x2mm magnets) — Image 2 of 2
3D model · Printables

Prusa Core One Webcam Mount for Logitech C920/C930 (for 6x2mm magnets)

Model details

Platform
Printables
Price
Free
License
CC-BY-NC-SA
Non-commercial use only, with credit; share remixes under the same license.
Formats
3MFSTEP
  • 72 Likes
  • 288 Downloads
  • 10 Makes
  • 25 Comments
  • 1 781 Views

Author:Blue

Published

Download on Printables

Description

Requires six 6x2mm magnets

Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount

In order to guide the USB cable from the top down you will need to disassemble the frame to fit through the hole at the front directly below the camera

The cable will be guided through the same holes use for the Buddy Cam as seen here:

https://help.prusa3d.com/guide/buddy3d-camera-for-core-one-installation_405529#862344

Comments 0

Loading comments…

More like this

Similar models

Names are used only to indicate the source of a result. Polyzon is not affiliated with the listed sites.