Cat Figurine

If you're interested in the commercial use of my models, or if you simply like my work and want to support me , please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Thank you!

All my photos are REAL and show an actual 3D-printed figure photographed by me.

[ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.2mm Infill: 5% Wall loops: 3 Supports: Tree (auto) Printed with: BambuLab PLA Matte Charcoal

Printed with fuzzy skin effect.

Fuzzy Skin : Contour Fuzzy Skin Point Distance : 0.25 Fuzzy Skin thickness : 0.25

As always! The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.