Sauron picture - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 1.28mm and the Actual Thickness is 1.28mm

Filaments Used: Black - #000000 PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3 Dark Grey - #455364 PLA Spectrum Basalt Grey Transmission Distance: 0.6 Light Grey - #c4c4c4 PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1 White - #ffffff PLA HIGH SPEED 3DPower Pure White Transmission Distance: 2.3 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Grey At layer #9 (0.8mm) swap to Light Grey At layer #13 (1.12mm) swap to Pure White for the rest.

My custom frame for this model: https://www.printables.com/model/1354495-picture-frame-for-my-hueforges