Bowden Tube Multi Filament Manifold

Manifold for guiding up to 5 filaments through a countertop (benchtop) or cabinet. Clamps on bowden tubes on one side using two M3x(10-14mm) and uses push in tube connectors on other.

When clamping on tubes wrap one layer of electrical tape around end of tubes and leave a few mm from internal tapered channel to allow for snug clamping and perfect alignment of tube pushed in from bowden connector. The taper will guide the pushed in tube into the narrow channel.

Edges rounded .25" so it can be flush mounted using ¼" router bit.