Geared Phone stand 2

Geared Phone stand 2

- I wanted to completely redesign the original version, but I found that the original was well made, so I only changed a few things -

- a new gear pattern ,

- a new more finely graduated locking mechanism ,

- charging holes for a wider cable ,

- larger width - it is a little more robust ,

- I prepared two size versions - L and XL .

- The L version is for landscape phones with a width of 70-75mm

- The XL version is for landscape phones with a width of 76-80mm or even for small tablets.

- This version is a complete print-in-place , the tolerances between the parts /0.35-0.4mm/ should be suitable for most printers.

- I printed with a layer height of 0.2mm and a nozzle of 0.4mm.

- The filament is Prusament PLA Prusa Pro Green - a very nice color

Do not use a brim when printing! The parts will then stick together and will not move!

Before printing, I recommend gently roughening the printing plate with a scotch-brite sponge + isopropyl