Apple MagSafe Charging Dock

Compatible with all Apple MagSafe devices. I have tested with

- iPhone 14 Pro Max

- iPhone 17 Pro Max

- AirPods Pro

- Apple Watch 42mm

- Apple Watch 46mm

This charging dock is designed for the Apple MagSafe chargers (55.5mm phone charger, 27.6mm watch charger), which should snap in to a snug friction fit (0.1mm clearance).

- If the fit is too tight, you can soften the PLA with a heat gun (or lighter) for just a few seconds, then the charger should easily press in.

- If the fit is too loose, you can shim around the charger with a small strip of paper, masking tape or the filament purge line.

Other features:

- Integrated heat vent to support the maximum fast charge rate

- Hidden internal cable ducts

- Internal space to add weight for stability. Fill it with anything heavy. Gravel, sand(mixed with glue), nuts and bolts, fishing lead weight, concrete...etc.

Recommended Print settings:

-Material: PLA

-LayerHeight: 0.1mm or variable

-Supports: None

-Speed: medium/slow (some printers might need this for better overhang)