Display stand for EDC knives

New model of stand are ready! Check it out: https://www.printables.com/model/1810340-single-edc-knife-stand-12-different-models

Hello everyone!

This time, I am presenting a knife stand that you can show off. If you have knives in your collection that are worth showing off, this model will be perfect for you.

I have prepared a version for displaying one knife for those just starting their adventure, and up to four knives for those who already have an extensive collection.

The stand can be printed in two versions (take a close look at the photo gallery with descriptions).

You can print standard walls (with mirror reflection) or You can print version with magnets, it's all up to You.

The knife pockets are 40 mm high and 20 mm deep.

The version with magnets has 6x4 mm holes. I personally recommend using magnets that are 2-3 mm thick so as not to scratch the knife blade.

All You need is filament of Your choice and 4 M3 screws (at least 12-16mm).

Printing settings: - 2-3 walls, 8-12% infill - filament of Your choice - I've made it from PLA and PETG-CF - pay attention when You slice parts to lay it on right side

I hope You enjoy this one.

I'm working on some new models to show Your knives, now I focus on model to show just one knife, but as best as possible.

Stay tuned!

P.S. If You need higher pockets or any other changes - just write to me.